Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 226 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 202
Annunciations & Alerts
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Message Comments
GDC2 MANIFEST
– GDC2 software
mismatch, communication halted.
The GDC2 has incorrect software installed. The system should
be serviced
GDL59 CONFIG
– GDL 59 config
error. Config service req’d.
GDL 59 configuration settings do not match those of backup
configuration memory. The system should be serviced.
GDL59 FAIL – GDL 59 has failed. A failure has been detected in the GDL 59. The receiver is
unavailable. The system should be serviced.
GDL59 MANIFEST – GDL59
software mismatch, communication
halted.
The GDL 59 has incorrect software installed. The system should
be serviced.
GDL59 RTR FAIL – The GDL 59
router has failed.
A failure has been detected in the GDL 59 router. The system
should be serviced.
GDL59 SERVICE
– GDL 59 needs
service. Return unit for repair.
A failure has been detected in the GDL 59. The system should
be serviced.
GDL69 CONFIG
– GDL 69 config
error. Config service req’d.
GDL 69A SXM configuration settings do not match those of
backup configuration memory. The system should be serviced.
GDL69 FAIL – GDL 69 has failed. A failure has been detected in the GDL 69A SXM. The receiver
is unavailable. The system should be serviced
GDL69 MANIFEST – GDL software
mismatch, communication halted.
The GDL 69A SXM has incorrect software installed. The system
should be serviced.
GEA # [1, 2] INOP - CAL
– Check
GEA rigging.
There is a problem with the GEA rigging. Check the rigging.
GEA # [1, 2] INOP - CNFG
– Check GEA software and
configuration.
There is a problem with the GEA software configuration. Check
the configuration. If the problem persists, the system should be
serviced.
GEA # [1, 2] INOP - COMM –
Check GEA config module connection.
There is a problem with the GEA config module connection.
Check the connection.
GEA # [1, 2] INOP - INTRL – GEA
internal fault.
The GEA has an internal fault. The system should be serviced.
GEA # [1, 2] INOP - SENS
– Check
GEA configuration.
There is an error in the GEA configuration. Check the
configuration. If the problem persists, the system should be
serviced.
GEA # [1, 2] INOP - TEMP
–
Check GEA config module cooling.
The GEA configuration module has insufficient cooling. If the
problem persists, the system should be serviced.
GEA # [1, 2] INOP - VOLT –
Check GEA voltages.
The GEA voltage is low. Check GEA voltages.
GEA1 CONFIG – GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not match those of backup
configuration memory. The system should be serviced.