Garmin Beechcraft 200 Series Cockpit Reference Manual Download

Page: 53 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series

190-02040-01 Rev. B

Flight Management

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

Flight

Management

Hazar

Avoidance

AFCS

Additional

Featur

Annun/Alerts

Appendix

Index

Flight

Instruments

EIS

Nav/Com/

XPDR/Audio

Flight

Management

Hazar

Avoidance

AFCS

Additional

Featur

Abnormal

Oper

ation

Annun/Alerts

Appendix

Index

Press the

ENT

Key.

Use the large

FMS

Knob to highlight the ‘Terrain Display’ range field.

Ranges are from 1 nm to 1000 nm.

To change the Terrain Display range setting, turn the small

FMS

Knob to

display the range list.

Select the desired range using the small

FMS

Knob.

Press the

ENT

Key.

Press the

FMS

Knob to return to the ‘Map - Navigation Map’ Page.

Displaying/removing the topographic scale (Topo Scale):

Press the

MENU

Key with the ‘Map - Navigation Map’ Page displayed. The

cursor flashes on the ‘Map Settings’ option.

Press the

ENT

Key. The ‘Map Settings’ Menu is displayed.

Turn the small

FMS

Knob to select the ‘Map’ group and press the

ENT

Key.

Turn the large

FMS

Knob to highlight the ‘Topo Scale’ Field.

Turn the small

FMS

Knob to select ‘On’ or ‘Off’.

Press the

FMS

Knob to return to the ‘Map - Navigation Map’ Page.

Setting up the ‘Land’, ‘Aviation’ or ‘Airspace’ group items:

Press the

MENU

Key with the ‘Map - Navigation Map’ Page displayed. The

cursor flashes on the ‘Map Settings’ option.

Press the

ENT

Key. The ‘Map Settings’ Menu is displayed.

Turn the small

FMS

Knob to select the desired group.

Press the

ENT

Key. The cursor flashes on the first field.

Turn the large

FMS

Knob to select the desired option.

Turn the small

FMS

Knob to select the desired setting (e.g. On/Off or

maximum range).

Press the

ENT

Key to accept the selected option and move the cursor to the

next item.

Repeat steps 5-7 as necessary.

Press the

FMS

Knob to return to the ‘Map - Navigation Map’ Page.

Decluttering the MFD navigation map:

Summary of Contents for Beechcraft 200 Series















































































































































































































































































Search results

Summary of Contents for Beechcraft 200 Series

Reviews:

Related manuals for Beechcraft 200 Series

Brands by name

Popular brands

Garmin Beechcraft 200 Series, Cockpit Reference Manual

Search results

Summary of Contents for Beechcraft 200 Series

Reviews:

Related manuals for Beechcraft 200 Series

Brands by name

Popular brands