Garmin Beechcraft 200 Series, Cockpit Reference Manual

Page: 80 / 270

Garmin G1000 NXi Cockpit Reference Guide for the Beechcraft 200/B200 Series 190-02040-01 Rev. B 56
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
8)
Press the
ENT
Key while ‘Activate?’ is highlighted to activate the direct-to
with the user-defined hold defined at the direct-to waypoint. (If the direct-
to waypoint is part of the active flight plan, the HOLD is inserted into the
active flight plan. If the direct-to waypoint is not part of the active flight
plan, an off-route direct-to hold is created.)
Exiting a user-defined hold inserted into the active flight plan:
Press the
SUSP
Softkey. The system will provide guidance to follow the
holding pattern to the inbound course and resume automatic waypoint
sequencing.
Removing a user-defined hold inserted into the active flight plan:
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
Active ‘Flight Plan’ Window (PFD).
2)
Press the
FMS
Knob to activate the cursor (not required on the PFD) and
turn the large
FMS
Knob to highlight the HOLD waypoint.
3)
Press the
CLR
Key. A ‘Remove Holding Pattern?’ confirmation window is
displayed.
4)
Select ‘OK’ and press the
ENT
Key. The holding pattern is removed from
the active flight plan. Select ‘CANCEL’ and press the
ENT
Key to cancel the
removal of the holding pattern.
Removing a user-defined hold at an off-route direct-to:
1) Press a Direct To Key to display the ‘Direct To’ Window (PFD or MFD).
2) Press the MENU Key to display the ‘Page Menu’ Window with the cursor
on the ‘Cancel Direct-To NAV’ selection.
3) Press the ENT Key. The holding pattern is removed.
MANAGING FLIGHT PLANS
Importing and Exporting Flight Plans
Ignoring a flight plan transfer from a wireless connection:
1)
When a flight plan transfer has been initiated from a mobile device, a
Pending Flight Plan pop-up alert appears in the lower right corner of the
MFD, and an Connext annunciation appears to the right of the MFD page
name.
2) Press the CLR Key to remove the pop-up alert and ignore the pending flight
plan. The pending flight plan will still be available on the ‘FPL - Flight Plan
Catalog’ Page.