9
190-00357-01 Rev H
DEFAULT NAV PAGE / ANNUNCIATORS
Default NAV Page
Active Leg of
Flight Plan, or
Direct-to Destination
User-selectable
Data Fields
(all four corners)
Course Deviation
Indicator (CDI)
To/From
Flag
The following symbols are used (directly above the
CDI) to depict the active leg of a flight plan or direct-to:
Course to a Waypoint, or Desired Course between Two Waypoints
Direct-To a Waypoint
Vectors-To-Final
Left-hand Holding Pattern
Left Procedure Turn
Right-hand Holding Pattern
Right Procedure Turn
DME Arc to the left
DME Arc to the right
To Quickly Display the Default NAV Page
1. From any page, press and hold
CLR
for approxi-
mately two seconds.
Bottom Row Annunciators and Messages
To Select a Different Data Item for any Data Field
1. With the Default NAV Page displayed, press the
MENU
key to display an options menu.
2. Turn the
large right
knob to highlight the “Change
Fields?” option, and press
ENT
to select this
option.
3. Use the
large right
knob to highlight the data
field you wish to change.
4. Turn the
small right
knob to display a list of avail-
able data items. Continue turning the
small right
knob to select the desired data item from the list.
5. Press
ENT
to select the desired data item and return
to the Default NAV Page.
6. Press the
small right
knob to remove the cursor
from the page.
Message Annunciator: Flashing (new mes-
sage), On, or blank (no message)
Terrain annunciations:
Ter Test, Ter N/A, Terrain, Ter INHB,
and TER Fail
Navigation Source:
GPS, VLOC, or GPS-PTK
CDI/RAIM Mode: Approach (LNAV,
L/VNAV, LNAV+V, or LPV ), Oce-
anic (OCN), Terminal (TERM), En
Route (ENR) or “0.30” (if the CDI is
manually set to "0.30" and not fly-
ing an approach). Annunciations not
applicable to the external CDI when
VLOC is active.
OBS Mode: Suspend
(SUSP), OBS or blank (for
auto-sequencing)
Page Annunciator (NAV/WPT/AUX/
NRST/FPL/VNAV/PROC), Waypoint
Alert (“Next DTK”), Turn Advisory
(“Left to xxx
º
”), etc.
GPS Integrity Failure
