![background image](http://html1.mh-extra.com/html/garland/xpe12/xpe12_installation-operation-and-maintenance-manual_564394007.webp)
Warning
Remove all removable panels before lifting and
installing.
Warning
Do not contact moving parts.
Warning
When using cleaning fluids or chemicals, rubber gloves
and eye protection (and/or face shield) must be worn.
Warning
Use caution when handling all metal surface edges of
the equipment.
Warning
This equipment is intended for indoor use only. Do not
install or operate this equipment in outdoor areas.
Warning
All covers and access panels must be in place and
properly secured, before operating this equipment.
Warning
Do not spray aerosols in the vicinity of this appliance
while it is in operation.
Warning
Risk of burns from high temperatures. You may get
burnt if you touch any of the parts during cooking.
Surfaces close to the cooking surface including side
panels may get hot enough to burn skin. Use extreme
caution to avoid coming in contact with hot surfaces
or hot grease. Wear personal protective equipment.
Warning
When checking for burner ignition or performance, do
not get too close to the burners. Slow ignition can cause
possible flashback, increasing the potential for facial
and body burns.
Warning
This appliance must be installed with sufficient
ventilation to prevent the occurrence of unacceptable
concentrations of substances harmful to the health of
personnel in the room in which it is installed.
Warning
Hazard. Keep hands and tools clear from the area above
the platens when platens are in motion towards the
exhaust hood. Be aware that adjacent platens may
unexpectedly move at any time. “Turn Grill Off” at
main switch when cleaning platens as there can be an
unexpected movement of the platens.
Warning
Slipping Hazard: Grease cans must be properly installed
before use. Improper installation will result in grease
on the floor which will create a slipping hazard. Ensure
grease cans are emptied and cleaned as needed to
prevent grease from overflowing onto the floor. The grill
may be slippery. Ensure floor area is clean. Care needs to
be taken as equipment may be hot
Warning
Pinch Hazard. Keep hands and tools clear of area between
platen and grill plate when platens are in motion. Be
aware that adjacent platens may unexpectedly move at
any time. “Turn Grill Off” at main switch when cleaning
platens as there can be an unexpected movement of the
platens.
Warning
Post in a prominent location, instructions to be followed
in the event the user smell gas. This information shall be
obtained by consulting your local gas supplier.