![background image](http://html1.mh-extra.com/html/garland/xpe12/xpe12_installation-operation-and-maintenance-manual_564394005.webp)
CODE
Warning
Authorized Service Representatives are obligated to
follow industry standard safety procedures, including,
but not limited to, local/national regulations for
disconnection / lock out / tag out procedures for all
utilities including electric, gas, water and steam.
Warning
For an appliance equipped with casters, (1) the installation
shall be made with a connector that complies with the
Standard for
Connectors for Movable Gas Appliances ANSI
Z21.69 • CSA 6.16,
and a quick-disconnect device that
complies with the Standard for
Quick-Disconnect Devices
for Use With Gas Fuel, ANSI Z21.41 • CSA 6.9,
(2) adequate
means must be provided to limit the movement of the
appliance without depending on the connector and the
quick-disconnect device or its associated piping to limit
the appliance movement and (3) the location(s) where
the restraining means may be attached to the appliance
shall be specified.
DAMAGE
DANGER
Improper installation, adjustment, alteration, service,
or maintenance of this appliance or installation of
a damaged appliance can result in DEATH, INJURY,
EQUIPMENT DAMAGE, and void the warranty. NEVER
install damaged appliances, equipment, or accessories.
ALWAYS have installation and service performed by
trained and authorized personnel.
Caution
Pouring water or ice on a hot heating elements/heated
surfaces will cause damage..
Warning
Pinch Hazard. Keep hands and tools clear from the area
above the platens when platens are in motion towards
the exhaust hood. Be aware that adjacent platens may
unexpectedly move at any time. “Turn Grill Off” at
main switch when cleaning platens as there can be an
unexpected movement of the platens
CLEARANCE
Caution
Do not block the supply and return air vents or the air
space around the air vents. Keep plastic wrappings,
paper, labels, etc. from being airborne and lodging in
the vents. Failure to keep the air vents clear will result in
unsatisfactory operation of the system.
Caution
Do not position the air intake vent near steam or heat
exhaust of another appliance.
Warning
Slipping Hazard: Grease from food products will splatter.
The areas surrounding the grill are a slipping hazard due
to the splatter zone. Clean the area surrounding the grill
regularly. The grill may be slippery. Ensure floor area is
clean. Care needs to be taken as equipment may be hot.
Warning
Failure to maintain required clearances and additional
distances as needed can result in INJURY and
EQUIPMENT DAMAGE.
Consult manufacturers’ literature, and sales and service
agencies as needed.
DANGER
To reduce the risk of fire, the equipment is to be
installed in non-combustible surroundings only, with no
combustible material within 18” (457 mm) of the sides,
front or rear of the appliance or within 40 “ (1 m) above
the appliance. The appliance is to be mounted on floors
of noncombustible construction with noncombustible
flooring and surface finish and with no combustible
material against the underside or on noncombustible
slabs or arches and have no combustible material
against the underside. Such construction shall in all
cases extend not less than 12” (305 mm) beyond the
equipment on all sides.
DANGER
Risk of fire/shock. All minimum clearances must be
maintained. Do not obstruct vents or openings.
Warning
Pinch Hazard. Ensure a minimum of 1" clearance
between the hood and the uppermost position of the
platen arm. To reduce the risk of chrushing injuries
between platen & hood.