50
Part #: GAR_IOM_ 4532522 Rev 08—6/17
Operation
Section 3
HOOD HEIGHT ADJUSTMENT
This setting limits the height of the top platen adjustment.
Ensure a minimum of 1” clearance between the hood and
the uppermost position of the platen arm.
1. Select
SETTING.
2. Enter
password
and press return.
3. Use down arrow
to scroll to “HOOD
HEIGHT”. Press
START button.
4. Record the number
as reference
under the
PLATEN POSITION
SETPOINT box.
TIP:
Use the up and down arrows to move
the platen heigth, the upper arrow
option will go in multiples of 6 mils, and
the lower arrow down in multiples of 4
mils. Factory default is 1366 MILS
5. When
the
PLATEN POSITION
SETPOINT box is
selected, a numeric
keypad appears.
Enter the new
settings and select
to proceed.
6. Select
APPLY
CALIBRATION
to set the new
setpoint.
7. Select
END
CALIBRATION
to save the new
setpoint.
8. Hood height calibration completed. System will go
back to home.
LANGUAGE SELECTION
This setting will give the option to choose different
language in the display.
1. Select
SETTING.
2. Enter
password
and press return.
3. Use down arrow
to scroll to
“LANGUAGE”. Press
START button.
4. Select
the
language
then press the
checkmark.
