USER GUIDE
EdgeSafe Bypass | M100G1xx
engineID: Display SNMP engine ID of the local system
8.4.3.101 show ssh configured
Display SSH configuration
8.4.3.102 show tacacs configured
Display configuration
8.4.3.103 show uptime
Display system uptime information
8.4.3.104 show users
Display a list of user accounts
8.4.3.105 show version
Display version information for current system image
8.4.3.106 show web configured
Display Web configuration
8.4.3.107 snmp <disable|enable>
Disable or enable SNMP server
Parameters:
disable: Disable SNMP server
enable: Enable SNMP server
8.4.3.108 snmp apply
Apply SNMP configuration. The user needs to run this command for any of the following configuration to
take effect:
snmp community <community name> [disable|enable|full-access|read-only]
snmp host <select from list> <disable|enable>
snmp user <disable|enable|full-access|read-only>
8.4.3.109 snmp community <community name> [disable|enable|full-access|read-only]
Add or configure an SNMP v1/v2c community
Note: The user need to run the snmp apply command for the configuration to take effect.
Parameters:
disable: Disable the user
enable: Enable the user
full-access: Add full access
read-only: Add read-only access
8.4.3.110 snmp host <select from list> <disable|enable>
Configure a host to send SNMP traps to
Note: The user need to run the snmp apply command for the configuration to take effect.
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
46