manualshive.com logo in svg

Garland M100G1AC, User Manual, Page: 74 / 89

Share
Download
Garland M100G1AC User Manual Download Page 74

USER GUIDE

EdgeSafe Bypass | M100G1xx

The user can configure the following management settings.

In the Interface area, the user can perform the following:

-

Select Enabled to activate management network access. The user can configure the device
management IP address, mask and gateway. Disabling the interface will cause Web and SSH access
unavailable.

-

Configure the CLI Session Timeout value in seconds.

-

Select or clear the Permitted IP option. When the option is selected, IP addresses not on the
Permitted IP List will be denied access to M100G1AC via SSH or Web.

The Permitted IP List lists all permitted IP addresses and masks.

In the DNS Server area, the user can add DNS server IP addresses to make DNS service work.

9.6.4 Configurations
Navigate to System > Configurations to save your configuration, restore a previous configuration, or to
reset to default configuration.

The following screenshot shows the Configurations page.

The Configuration List area lists all previous configuration files. You can select the radio button for the
corresponding configuration file and perform any of the following:
View: Click this button to view the configuration file.
Restore: Click this button to restore the configuration defined in the file.
Delete: Click this button to delete the configuration file.
Download: Click this button to download the configuration file.

Garland Technology  |  716.242.8500  | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.

73

Summary of Contents for M100G1AC


























































































Reviews:

No comments