Garland M100G1AC User Manual Download Page 61

Page: 61 / 89

USER GUIDE

EdgeSafe Bypass | M100G1xx

By default, the module statistics on this page is auto-refreshed. To suspend the auto-refresh
function, click the Suspend auto refresh button.

9.4.2 Realtime Traﬃc Statistics
Navigate to Statistics > Realtime Traﬃc to view the real-time traﬃc statistics over the past 1200 seconds.

The following screenshot shows the real-time traﬃc of segment 1.1 over the past 1200 seconds.

Tips for viewing the realtime traﬃc statistics:

To view the realtime traﬃc statistics of a speciﬁc segment, select the segment from the drop-down
list box.

Two tabs are provided in the upper-right corner: Packets and Bytes. Select either to view the
realtime traﬃc statistics of packets or bytes.

To view the realtime statistics of a speciﬁc network port or monitor port, select the checkbox for the
corresponding network port or monitor port.

Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.

Summary of Contents for M100G1AC
























































































Search results

Summary of Contents for M100G1AC

Reviews:

Garland M100G1AC, User Manual, Page: 61 / 89

Search results

Summary of Contents for M100G1AC

Reviews: