USER GUIDE
EdgeSafe Bypass | M100G1xx
8.4.3.54 management eth-if <disable|enable>
Configure Ethernet interface
Parameters:
disable: Disable management interface
enable: Enable management interface
8.4.3.55 management eth-if ip <IP address> mask <IP address>
Configure IP address for management interface
8.4.3.56 management eth-if default-gateway <IP address>
Configure default gateway for management interface
8.4.3.57 management dns ip <IP address>
Add a DNS server
8.4.3.58 management permitted <disable|enable>
Configure management permitted IP
Parameters:
disable: Disable permitted IP check
enable: Enable permitted IP check
8.4.3.59 management permitted ip <IP address> [mask <IP net mask>]
Add a permitted IP address
Parameters:
mask: Permitted IP net mask
8.4.3.60 management whoami <off|on>
Turn on/off the whoami function, which is designed for rack identification. When the function is turned on,
the Sys OK LED blinks every second.
Parameters:
off: Turn off the whoami function
on: Turn on the whoami function
8.4.3.61 name <hostname [a-zA-Z0-9-_.]>
Configure device name, which will be shown in CLI prompt
8.4.3.62 no configuration <select from list>
Remove system configuration
8.4.3.63 no management dns <select from list>
Remove management DNS server
8.4.3.64 no management permitted <select from list>
Remove management permitted IP
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
42