USER GUIDE
EdgeSafe Bypass | M100G1xx
8. Command line interface (CLI)
This chapter explains command names and command functions.
To view the full command list and to quickly navigate to the descriptions of each command, use the Table
of Contents of this user guide.
8.1 CLI Features
The CLI supports auto complete and it also supports displaying online help with “?”.
Each command parameter can include any letter or number and '_', '/', '.', ';', '.','-' characters. But cannot
contain any spaces.
8.2 Login
To log in to the command line interface (CLI), use serial console software and a serial cable to connect to
the RS232 management port or use SSH to connect to the management IP of the M100G1AC device.
Once connected, the login prompt will be shown
Welcome to Garland Technology’s EdgeSafe Bypass TAP
M100G1AC/DC Login:
Use the following username and password as the default to access the CLI
Username:
admin
Default Password:
gtadmin1
Once logged in, the system prompt will be shown
M1001Gxx>
8.3 Command modes
The CLI command mode structure is hierarchical, and each mode supports a set of specific commands.
The following sections describe the following command modes:
-
Command mode: user_exec
-
Command mode: privileged_exec
-
Command mode: configure
After login, the default mode would be user_exec, to go into privileged_exec use the “enable” command.
To go into the configure mode, use the “configure’ command.
Notes:
-
EXEC commands are not saved when the software reboots.
-
Commands issued in a configuration mode can be saved to the startup configuration. When the
running configuration is saved to the startup configuration, these commands will execute when the
software is rebooted.
8.4.1 1. Command Mode: user_exec
8.4.1.1 cli clear-history
Clear the CLI history for the current user
Garland Technology | 716.242.8500 | garlandtechnology.com/support
Copyright © 2021 Garland Technology, LLC. All rights reserved.
30