USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 89 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.58.4 Display current user
Current user can be displayed by command “get_current_user”
6.59 M2N mode
M2N (monitor port to network port link fail) mode support link drop on network port if correspondent
monitor port link gone. This Mode can be set independent for each monitor port.
6.60 Displaying power supplies states.
The command get_power_state displays the status of the 1U chassis power supplies
This command supported only with hardware version 0.3.0.0.11 and up.
M40GBP$ get_current_user
current user:
customer
M40GBP$
M40GBP$ get_m2n
m2n (Mon port 0): off.
m2n (Mon port 1): off.
command succeeded.
M40GBP$ set_m2n MON0 on
command succeeded.
M40GBP$ get_m2n
m2n (Mon port 0): on.
m2n (Mon port 1): off.
command succeeded.
M40GBP$ set_m2n MON1 on
command succeeded.
M40GBP$ get_m2n
m2n (Mon port 0): on.
m2n (Mon port 1): on.
command succeeded.
M40GBP$ set_m2n MON1 off
command succeeded.
M40GBP$ get_m2n
m2n (Mon port 0): on.
m2n (Mon port 1): off.
command succeeded.
M40GBP$
M40GBP$ get_power_state
Power 1: OK
Power 2: OK
PASS
M40GBP$ get_power_state
Power 1: FAIL
Power 2: OK
PASS
