USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 94 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.62.4 Set/get_snmp_user
set_snmp_user XXX - set snmp user name (5 - 30 symbols).
M40GBP$ set_snmp_user test1
New SNMP setting will take effect after apply_snmp.
command succeeded.
M40GBP$ apply_snmp
SNMP restart is in progress, please wait.
command succeeded.
M40GBP$ get_snmp_user
snmp user: test1
command succeeded.
M40GBP$
M40GBP$ get_snmp_entry
========== entry index 2 ============
snmp user: test1
snmp version: 1
snmp community status: off
snmp community access: read.
snmp server ip address:
snmp password:
command succeeded.
M40GBP$
M40GBP$
M40GBP$ get_snmp_entry all
snmp msg port: 161
snmp trap port: 162
TACACS state: off.
TACACS state for snmp: off.
permitted ip: all
========== entry index 1 ============
snmp user: customer
snmp version: 1
snmp community status: on
snmp community access: read, write, trap.
snmp server ip address: 192.168.0.6
192.168.0.111
snmp password: ***
========== entry index 2 ============
snmp user: test1
snmp version: 1
snmp community status: off
snmp community access: read.
snmp server ip address:
snmp password:
command succeeded.
