Garland EdgeSafe M40G1AC, User Manual

Page: 105 / 159

USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 104 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
Take effect after setting
M40GBPSnmpApply
M40GBP SnmpPassword
2.4 OCTET STRING
(SIZE(17..121)) write-only
Define the SNMP v3 and WEB interface
password.
Parameter consists of old and new
passwords separated by semicolon.
Take effect after setting
M40GBPSnmpApply
M40GBP SnmpApply
2.5 INTEGER
write-only apply (1) Activate all the SNMP changes.
M40GBP SysTime
3.1 OCTET STRING
(SIZE(1..32))
read-write Set/Get device current time/Date .
M40GBP SysIp
3.3 IpAddress
read-write Set/Get M40GBP IP address.
M40GBP SysNetmask
3.4 IpAddress
read-write Set/Get M40GBP IP subnet mask.
M40GBP SysGateway
3.5 IpAddress
read-write Set/Get M40GBP gateway IP address.
M40GBP SysResetLog
3.6 INTEGER
write-only reset Reset/Clear M40GBP log file.
M40GBP SysReboot
3.8 INTEGER
write-only reboot (1) Reboot the M40GBP .
M40GBP UnitName
3.9 OCTET STRING
(SIZE(1..32))
read-write Set/Get unit name
M40GBP SysTftpIp
3.10 IpAddress read-write
Set/Get TFTP server IP address.
M40GBP SysTftpRoot
3.11 OCTET STRING
(SIZE(1..64)) read-write
Set/Get TFTP server root directory.
M40GBP SysUpdate
3.12 INTEGER
read-write update(1),
force(2) Update the M40GBP firmware .
.
M40GBP SysUpdateStatus
3.13 OCTET STRING
(SIZE(1..1024))
read-only Get M40GBP firmware update status.
M40GBP SysResetErr 3.14 INTEGER read-write reset(1) Reset/Clear M40GBP errors.
M40GBPSysWhoami 3.15 INTEGER read-write on(1),
off(2) Unit identification.
On/off system OK led blink.
M40GBPSysRemoteLog
3.16 INTEGER read-write
on(1),
off(2) Get/set remote log state.
NOTE: next SNMP command should be
send not before 1 sec after this
command
M40GBPSysRAemoteLogIp 3.17 IpAddress read-write Set/Get remote log server IP address.
NOTE: next SNMP command should be
send not before 1 sec after this
command
M40GBPSysNTP 3.18 INTEGER read-write on(1),
off(2) Get/set NTP state.
M40GBPSysNTPServerIp 3.19 IpAddress read-write Set/Get NTP server IP address.
M40GBPSysDayLight 3.20 INTEGER read-write default(1),
off(2) Get/set daylight saving mode.
The daylight saving mode will be set
finally by M40GBPSysTimezone.
M40GBPSysTimezone
3.21 OCTET STRING
(SIZE(1..64))
read-write Get/set device timezone.
Timezone examples: America/Barbados,
Asia/Bangkok.
Full list of supported names can be
found in Linux.
Command sets the default daylight
saving mode.
To disable default daylight saving mode
perform
M40GBPSysDayLight with parameter OFF first. To complete timezone setting reboot should be issued.
M40GBPSysWebUser
3.22 OCTET STRING
(SIZE(5..30))
read-write Get/set the WEB user name.
M40GBPSysWebPassword 3.23 OCTET STRING
(SIZE(17..121)) read-write Set the WEB user password.Set only
variable, read will return zero length
string. Parameter consists of old and
new passwords separated by semicolon.
M40GBPSysSaveConfig
3.24 OCTET STRING
(SIZE(4..20))
read-write Save device configuration. Set only
variable, read will return zero.
M40GBPSysRestoreConfig 3.25 OCTET STRING
(SIZE(4..20)) read-write Restore device configuration. Set only
variable, read will return zero. The unit
will be rebooted.