USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 53 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.19 Ethernet management port gateway IP address
The Ethernet management port default gateway IP address is 10.10.10.200.
The net default gateway IP address can be set to different IP address using the command: set_gateway
Example:
Notes:
New gateway address will take effect only after performing device reboot.
Remote control via telnet, SSH, WEB or SNMP applications should be reconfigured to
use new gateway address.
6.20 Time
To change the M40GBP date and time use the command “set_time mm DD HH MM YYYY”
Where:
mm - month,
DD - day,
HH - hour ( 24 hours format),
MM - minute,
YYYY -year
Example:
M40GBP$ get_gateway
default gateway ip address: 10.10.10.200
command succeeded.
M40GBP$ set_gateway 10.10.10.200
New default gateway will take effect after reboot.
command succeeded.
M40GBP$ get_gateway
default gateway ip address: 10.10.10.200
command succeeded.
M40GBP$
M40GBP$get_time
Time: Thu Feb 5 13:10:00 2009
command succeeded.
M40GBP$set_time 2 5 13 10 2010
Thu Feb 5 13:10:34 2009 0.000000 seconds
Fri Feb 5 13:10:00 2010 0.000000 seconds
command succeeded.
M40GBP$get_time
Time: Fri Feb 5 13:10:02 2010
command succeeded.
M40GBP$
