USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 91 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
6.62 SNMP
The IBS supports up to 11 different SNMP entries (Entry = user name/community).
Each entry support up to 8 different SNMP servers.
Each entry support different level of access (read only, read/write, trap only, read Only with Trap,
read/write with Trap) and different SNMP version 1, 2c, and 3 (SHA and AES) and SNMP discovery.
6.62.1 SNMP_Enrty commands
There are 4 different commands which enable the option to view/select/add/delete the SNMP entries.
get_snmp_entry
To view the current SNMP entry or the view all entries use the command:
get_snmp_entry [entry_index|all] -
get current snmp entry,
all - get all entries,
1 - 11 - get correspondent entry.
get_snmp_entry [entry_index|all] -
get current snmp entry,
all - get all entries,
1 - 11 - get correspondent entry.
M40GBP$ get_snmp_entry all
snmp msg port: 161
snmp trap port: 162
TACACS state: off.
TACACS state for snmp: off.
permitted ip: all
========== entry index 1 ============
snmp user: customer
snmp version: 1
snmp community status: on
snmp community access: read, write, trap.
snmp server ip address: 192.168.0.6
192.168.0.111
snmp password: ***
command succeeded.
M40GBP$
