USER GUIDE
EdgeSafe 40G Bypass Modular Network TAP | M40GBP
Version 1.6 Page 137 of 159
Garland Technology reserves the right to make changes without further notice to any products or data herein to improve reliability, function or design.
Confidential -This document is
Garland Technology
.'s property. This document may not be copied, duplicated and transferred to electronic or mechanized
media or used for any other purpose, including any part thereof or attachment thereto, except as authorized in advance and in writing by
Garland Technology.
7.14.1 Device firmware update area
The Update command updates the M40GBP firmware’s:
Follow the FW update user guide to load the new Firmware
NOTE: If the firmware update process is interrupted, your M40GBP may not function
properly. We recommend the process be done in an environment with a steady power
supply (preferably with UPS).
7.14.2 System restore are
7.14.2.1
Set default parameters
Restore the factory default settings for all parameters including system user name and password.
7.14.2.2
Reset errors
Reset the M40GBP errors.
The M40GBP displays on the LCD the first error only, after resetting the error the M40GBP will
display the next error if exist.
7.14.2.3
Reboot
Checking Reboot check box force the M40GBP to reboot
The following screen appears during the M40GBP reboot progress, when the M40GBP will load again
the main screen will appear.
7.14.2.4
Power off (only for hardware 0.3.0.11 and up)
Module power will be off after select check box “Power off” and click “Apply” button.
7.14.3 Technical support area
The command gathers all the necessary information needed for the Technical Support team in order to
help resolving technical problems.
