manualshive.com logo in svg

Garland CFA Garland Grill 2.0, Installation, Operation And Maintenance Manual

Share
Download
Garland CFA Garland Grill 2.0 Installation, Operation And Maintenance Manual Download Page 25

Document Number:   GAR_IOM_CFABROILER_4603091   rev 00   (08/21/2017) 

25

Section 3 

Operation

Cooking Procedure

• 

The comprehensive cooking procedure on the Garland 
Grill, together with proper food preparation and 
handling methods, has been developed by Chick-
fil-A for the most efficient and seamless process. Only 
authorized personnel is given access to the details on 
the CFA website. Website is password protected. 

• 

This section provides only the highlights of the cooking 
process on a Garland Backyard Grill. 

• 

For stepwise instructions on using the controller, refer 
to section “easyTOUCH Controller”.

SLEEP MODE AND WARNING

A sleep mode is automatically triggered if the grill has been 
idle for 5 minutes after previous cook cycle.

,

CAUTION

If the broiler sounds a warning tone that it will about to 
go into sleep mode, step back from broiler immediately 
to avoid risk of burn injury when broiler lid closes. Ask 
Boards person to reject or cancel the broiler’s request to 
go into sleep mode. 

To bring grill out of Sleep Mode, push the round green 
button or WAKE on screen. The platen will raise and the 
Recipe Selector screen appears.

PREPARING GRILL FOR USE & RELEASE AGENT

(Before the first operation of the day) 

1.  To verify that:

• 

Grill plates are free of residues. 

• 

The front deflector shield, two side skirts and 
grease drawer are installed properly on grill.

• 

Other tools and attachments can be assembled 
during pre-heat.

2.  Turn grill power switch on (green light on). 

Green light 

indicates 

that the 

Grill power

is “ON”

3.  Wait for the control software to boot up. The platen will 

rise and the HOME screen appears (shown below).

4.  Spray release agent thinly and evenly on the lower, and 

then the upper grill plate, 4 to 6 squirts each. Do not 
wipe grates.

  

Important

Do not spray release agent onto hot grill plates. 
Always apply release agent prior to pre-heating 
grill. Release agent must heat with grill to set. 

5.  Press Press&Go icon to pre-heat grill. Platen will close.

6.  When grill is heated to the set temperature, the platen 

will rise and the Recipe Selector screen appears.

Summary of Contents for CFA Garland Grill 2.0

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands