Gardsman CTC-1052, User Manual, Page: 43 / 46

40
---
Reset to
factory
default FTSET PROG 1111 FTSET:YyS
---
3G/LTE RSSI
(3G Version
Only)
GRSSI PROG 6336 GRSSI?
---
Delete
Device
DEVDL
PROG 1111 DEVDL:SCMD
To delete devices learnt into the panel.
SCMD:
80 = delete All Devices.
--- Add Device DEVAD
PROG 1111 DEVAD:SCMD,ID
PROG 1111 DEVAD:94010203A001
To add devices into the panel
SCMD:
93 = add silent device
94 = add device
The devices are added sequentially into zone 1-20
ID: The 10-digit device ID (usually labelled on the back of
the device)
---
Get Current
Panel
Settings
(3G Version
Only)
ULOAD
PROG 1111 ULOAD:IP address,PORT,ID
To obtain the current panel settings
IP address – The IP address to receive the current panel
settings. Format: IP:xxx.xxx.xxx.xxx
PORT – Enter the port number of the IP address. Format:
PORT:xxxxx (up to 5 digits).
ID: 5-digit ID number.
For Example:
PROG 1111 ULOAD:IP:123.123.123.123,PORT:54321,2222
<NOTE>
1. IP Address confirm (COMIP) & Port number confirm (COMPO) commands are used for
GPRS server confiramtion purpose only. They do not change the IP address nor the port
number settings.
2. GPRS functions can only be programed via SMS messages, and the commands MUST be
sent in this sequence: Country code  IP address  Port number  GPRS/IP account
number

Access Point Name

User name

Password.
 One comand per one SMS message. Multiple command in one SMS message is not allowed.
3. When setting IP Address Confirm (COMIP) and Port Number confirm (COMPO)
commands together, the confirmation will send to assigned IP address. However, if COMIP
and COMPO are set respectively or one of their commands is deleted or unset, the
confimation will be sent over SMS to cell phone.
4. User and Central Monitoring Station will receive the SMS confirmation message in this
format:
“ Confirmed_PROG_1111_COMIP: 192.168.1.110 ”, or
“Confirmed_PROG_1111_COMPO: 3301” .
5. 3G/LTE RSSI ( 3G Version Only )
1. < RSSI 10, poor signal.
2. RSSI 15-30 , normal signal.
3. RSSI 99 , 3G/LTE not connected
6. To set multiple SMS commands:
1. Ex: PROG_1111_TELN1: 0227940559_ TELN2: 0227940559 (underline represents
<space>).
2. Maximum of 70 digits, including <space>, are allowed to be contained in a SMS