TR-CL180 Lens Controller - User Manual
14.3
Command structure
27
14.4
General commands
29
14.5
Analog mode commands
32
14.6
Waveform commands
34
14.7
Programmable step commands
39
14.8
Command summary
41
15
TR-CL180 reference information
42
15.1
Specifications and ratings
42
15.2
Restrictions
43
15.3
Event codes
43
15.4
Error codes
44
TR-CL180 Lens Controller - User Manual
4
Getting started
Before you use this product, make sure that you have read and
understood
Section 5, Safety
(or
Section 6, Sicherheit
, or
Section 7,
Sécurité
) and
Section 15.1, Specifications and ratings
, and that you have
checked the TR-CL180 fulfils your requirements.
Mount
the TR-CL180 (see
Section 8, Mounting the TR-CL180
) and
connect
it up (see
Section 9, Connecting the TR-CL180
), as required.
Set up
the TR-CL180 for the desired operation as described in
Section
13, Webpage configuration
or
Section 14, Configuration commands
.
We recommend that you visit
www.gardasoft.com
for application notes
on this product.
There is also a support web page there, which has information on trouble-
shooting problems.
4.1
TR-CL180 features - a summary
The TR-CL180 product is a single channel lens controller for use in
machine vision applications. It works with the following ranges of Optotune
lenses:
EL-10-30
EL-16-40
4.2
GigE Vision
TM
The TR-CL180 is GigE Vision™ compatible. This means that any
compatible GigE Vision client image processing software (for example,
CVB, LabVIEW, Halcon) allows the user to view and change controller
settings. GigE Vision is an industry standard protocol running on Ethernet
which provides easy configuration and control of cameras and other
devices.
The TR-CL180 is the first non-streaming device to become available
(at the time of publishing this manual), so some packages may not support
non-streaming devices yet. If your package does not work with the
TR-CL180 then please inform the manufacturer or Gardasoft.
—
5
—
WWW.STEMMER-IMAGING.COM
