TR-CL180 Lens Controller - User Manual
Copyright and disclaimer notice
Except as prohibited by law:
All hardware, software and documentation is provided on an ‘as is’ basis. This
information is for guidance only. Installers must perform their own risk assessment
specific to each installation.
It is essential that the users ensure that the operation of the product is suitable for
their application.
The users must ensure that incorrect functioning of this equipment cannot cause any
dangerous situation or significant financial loss to occur.
Deliberate acts of endangerment and vandalism are not covered by this document and
must be considered by the installer.
While care has been taken in the preparation of this document Gardasoft Vision Ltd will
not accept any liability for consequential loss of any kind except those required by law.
All trademarks acknowledged. Hardware, software and documentation are Copyright
2002 – 2016 Gardasoft VisionLtd.
EC conformity declaration
The EC Certificate of Conformity is available from Gardasoft Vision Ltd on request
Issue status of this document: Issue 003 (January 2017)
TR-CL180 Lens Controller - User Manual
Contents
4
Getting started
5
4.1
TR-CL180 features - a summary
5
4.2
GigE VisionTM
5
5
Safety
6
5.1
Electrical
6
5.2
General
6
6
Sicherheit
7
6.1
Elektrik
7
6.2
Allgemeines
7
7
Sécurité
8
7.1
Électricité
8
7.2
Général
8
8
Mounting the TR-CL180
9
8.1
Environmental considerations
9
9
Connecting the TR-CL180
10
9.1
Power
10
9.2
Lens output
11
9.3
Trigger input
11
9.4
Ethernet
12
9.5
RS232
12
9.6
Connectors (general)
13
10
General description
14
10.1
Triggering
14
10.1.1
Trigger input options
15
10.2
Flags
16
10.3
Factory settings
17
11
Front panel commands
17
11.0.1
Startup
17
11.0.2
Setting up continuous optical power
18
11.0.3
Setting up switched output
19
11.0.4
Setting up analog control
20
11.0.5
Setting numerical values
20
11.0.6
Using the key lock
21
11.0.7
Viewing the output current
22
12
Ethernet address
23
12.1
IP address
23
12.1.1
DHCP
24
12.1.2
Fixed IP address
24
13
Webpage configuration
25
13.1
Main page
25
13.2
Configuration page
25
13.3
General setup page
26
14
Configuration commands
27
14.1
Ethernet configuration
27
14.2
RS232 configuration
27
WWW.STEMMER-IMAGING.COM
