BENZING M1 – Fancier
INSTALLATION AND OPERATION
24
HB_BENZING-M1_ZUECHTER-EN_20-.doc
GANTNER Pigeon Systems GmbH
3.2.4
Using the BENZING Station in the Fancier System
The BENZING M1 can also be connected to the fancier system via a BENZING Station. In
this case all devices of the fancier system like the loft antennas, printer etc. will be
connected directly to the BENZING Station.
Figure 3.5
- Connection of the BENZING Station in the Fancier System
The BENZING Station provides the following connectors:
1
Additional Power Supply. But it is recommended to apply power as near to the loft
antennas as possible (see previous section with figure 3.1 to 3.4).
2
DB-9 socket for connection of the PLB Antennas, the G2 Antennas or the BENZING
Antenna Controller with EFA Antennas.
3
PMDIN socket for existing (older) components (SAN, INN, CNN, ANN etc.).
4
Parallel printer port for connection of conventional printers.
5
DB-9 socket for connecting a mobile phone or GSM modem.
6
DB-15 socket for connection with the BENZING M1. The BENZING M1 is plugged into
the BENZING Station as shown in figure 3.6.
