![background image](http://html1.mh-extra.com/html/gantner/benzig-m1/benzig-m1_fancier-manual_3408627005.webp)
BENZING M1 - Fancier
HB_BENZING-M1_ZUECHTER-EN_20-.doc
3
GANTNER Pigeon Systems GmbH
General warning and safety instructions
Dear customer,
We congratulate you on having selected a product of GANTNER Pigeon Systems GmbH. So that our
product functions in your installation with safety and to your complete satisfaction, we take this
opportunity to familiarise you with the following ground rules:
1.
Installation, commissioning, operation and maintenance of the product purchased must be
carried out in accordance with instructions, i.e. in accordance with the technical conditions of
operation, as described in the corresponding product documentation.
2.
Before either installation, commissioning, operation or maintenance it is therefore essential that
you read the corresponding chapter of this manual and observe its instructions.
3.
If there are still some points on which you are not entirely clear, please do not take a chance, but
ask the customer adviser responsible for you.
4.
Where not otherwise specifically laid down, appropriate installation, commissioning, operation and
maintenance of the product is the customer’s responsibility.
5.
Directly on receipt of the goods, inspect both the packaging and the device itself for any signs of
damage. Also check that the delivery is complete (-> accessories, documentation, auxiliary
devices, etc.).
6.
If the packaging has been damaged in transport or should you suspect that the product has been
damaged or that it may have a fault, the product must not be put into service. In this case,
contact your customer advisor. He will make every effort to resolve the problem as quickly as
possible.
7.
Servicing of our product must only be carried out by suitably trained personnel. Here, the
appropriate installation provisions in accordance with the relative national Electrical Engineers
construction regulations (e.g. ÖVE, [Austrian] VDE, [German]...) must be observed.
8.
Where not otherwise stated, installation and maintenance work on our appliances is exclusively to
be carried out when disconnected from the power supply. This applies in particular to appliances
which are normally supplied by low-tension current.
9.
It is prohibited to make alterations to the appliances.
!