BENZING M1 – Fancier
INSTALLATION AND OPERATION
22
HB_BENZING-M1_ZUECHTER-EN_20-.doc
GANTNER Pigeon Systems GmbH
3.2.3
Installation with EFA EXPRESS Antennas and the BENZING Antenna Controller
Figure 3.4
– Fancier system BENZING M1 with EFA EXPRESS Antennas
To set-up the system, follow these steps:
1. Connect all EFA EXPRESS Antennas EFA (B) into the corresponding jack
sockets of the BENZING Antenna Controller (H).
2. If you want to use more than 4 EFA EXPRESS Antennas, a second Antenna
Controller with 4 more EFA EXPRESS Antennas can be connected to the
first one.
Attention:
Between the antennas on two different Antenna Controllers
there must be a minimum distance of 1 m (3 feet).
3. Plug-in the cable of the BENZING M1 Power Supply Unit (D) at the DB-9 plug of
the M1 Fancier Cable (C).
4. Connect the BENZING M1 (A) with the supplied M1 Fancier Cable (C) to the
first BENZING Antenna Controller (H).
5. Connect the power supply to mains. The green LED "Power Supply" (G) on the
DB-9 plug will light up and the BENZING M1 will start-up.