BENZING M1 – Fancier
INSTALLATION AND INITIAL OPERATION
HB_BENZING-M1_ZUECHTER-EN_20-.doc
25
GANTNER Pigeon Systems GmbH
Figure 3.6
- Plugging the BENZING M1 into the BENZING Station
Note:
Also read the short description of the BENZING Station and follow the instructions on
this description!
3.3
Using the BENZING M1 in a Club
At the club the BENZING M1 is connected to a BENZING ClubSystem, or for older systems
to a BENZING clubPOINT or a network node CNN, by using the BENZING M1 club cable.
Subsequently, other devices like the power supply unit, the Club Antenna CAN (not needed
if the BNEZING ClubSystem is used) or the printer etc. are connected to the BENZING
ClubSystem or the BENZING clubPOINT. After having connected all parts of the system the
power supply unit is connected to mains power.
Power supply of the BENZING M1 at the club is always provided with the BENZING M1 club
cable.
When installing the system in a club it is of utmost importance that you also
observe the instructions in the BENZING M1 club manual and the indications of
the enclosed package leaflets which come with the corresponding system
components.
The way the system is installed at the club is displayed in figures 3.7 and 3.8.
!
