ADP 4100 Printer
FCC
FCC Emission Interference
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference,
and,
2. This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modifications not expressly approved by Unimark
could void the operator’s authority to operate the equipment under
these conditions and rules.
Note
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at their own cost.
ADP 4100 Printer
Installation and Operators Manual
, April 2007
3