16
9. Nozzles for different types of fuel
Different nozzles have been developed for the various types of fuels. The nozzles have been
optimized for:
- perfect ignition behavior
- aesthetic flame shape
- rapid extinguishing of the flame to enable fast step sequences
- best performance of the flame monitoring system
Make sure that you use the correct nozzle for your application every time you operate the device. The
usage of other nozzles than the original ones is prohibited.
The following nozzles are available:
This nozzle is intended to be used with gas cartridges.
To gain different flame heights this nozzle is available in these different
sizes: S / M / L / XL / XXL
The size XXL is included in the delivery of the gas cartridge option.
This type of nozzle is must be used together with gas bottles if the
gasiform phase is being used. It is included in the delivery of the gas
bottle option.
Different sizes are not being offered because the flame height can be
changed by adjusting the pressure setting at the pressure regulator.
This nozzle has been designed for the usage in conjunction with gas
bottles if the liquid phase is being used. It is not included in the delivery
of the gas bottle option and must be ordered separately if required.
This kind of usage is at one's own risk.
Different sizes are not offered because for this kind of application
normally a very high flame is desired and the flame height can be
adjusted at the regulator. Please note that special regulators are
necessary for the liquefied phase and please read the instructions
given in the section 'Approved fuels and instructions if the gas bottle
option is being used'.
10. Changing the nozzles and nozzle holder
The nozzles have always to be screwed in with the supplied sealing.
If you are changing the nozzle make sure to tighten them finger-tight.
Holder for up to four nozzles can be found in the housing of the G-Flame.
