TIG 3200 AC/DC
38
5.2.2. TIG AC PROCESS – STANDAR ARC.
In this mode the welding start/end is controlled by the torch pulsation system. (See Operation Mode for selection - Cycle
Parameters for display), the arc is standard AC TIG AC.
We can regulate the frequency of alternating current (FAC Control), besides adjusting the wave balance (Balance Con-
trol) and adapting the penetration of the cord (Penetration Control). By varying the balance of the wave (Balance) it is
possible to control the relationship between the cleaning current and the electric arc penetration.
KEY
ACTION
DESCRIPTION
P1
Back to Main Menu
P2
Access to Program File
P3
Access to Operation Mode
P4
Access to Parameters Cycle
Access to specific cycle of selected mode.
P5
Select secondary correction
Temporarily place secondary correction in main position.
E1
Modify main correction
Set frecuency AC.
Set balance AC.
Set penetration AC.
E2
Modify Master value
Set the welding intensity.
THE EQUIPMENT HAS AN AUTOMATIC TUNGSTEN ROUNDING SYSTEM (SEE AC CYCLE PARAMETERS - CALOTA
CREATION).
