TIG 3200 AC/DC
43
5.2.7. TIG AC PROCESS – PULSED ARC - INTERVAL MODE.
This mode of operation allows the realization of consecutive weld beads, with pulsed arc, with space between them
(TOFF Control) and of a determined time (TON Control).
The regulation of pulsed frequency (FHz) will be made from Table 4 (See AC Cycle Parameters).
We can regulate the alternating current frequency (FAC Control), besides adjusting the wave balance (Balance Control)
and adapting the cord penetration (Penetration Control).
KEY
ACTION
DESCRIPTION
P1
Back to Main Menu
P2
Access to Program File
P3
Access to Operation Mode
P4
Access to Paremeters Cycle
Access specific process cycle and selected mode.
P5
Select secondary correction
Temporarily place secondary correction in main position.
P6
Select secondary value
Temporarily place secondary value in main position.
E1
Modify Main Correction
Set frecuency AC.
Set balance AC.
Ajuste de penetración AC.
E2
Modify Master Value
Set penetration AC.
Set welding time.
Set time stop.
