Gaggenau CV 282, Instruction Manual

Page: 24 / 64

24
en
Timer functions
O
Timer functions
Timer functions
Your hob has three timer functions:
▯
Cooking timer
▯
Timer
▯
Stopwatch function
Cooking timer
The hotplate automatically switches off after the time
that is set has elapsed.
You can set a time from 1 to 99 minutes. The time
elapses in the timer display in minutes, the final half a
minute is displayed in seconds.
Setting procedure:
1 Select the hotplate and the required heat setting.
2 Touch the
6
symbol.
The
6
indicator lights up.
‹‹
lights up in the timer
display.
3 Use the twist knob to select the required cooking
time.
4 Touch the
6
symbol to confirm the selected time.
The cooking time begins to elapse.
Note: If the flexible cooking zone is selected as the only
hotplate, the set time for the entire cooking zone is the
same.
Frying/cooking sensor function
If a cooking time has been programmed for a hotplate
and the frying sensor or cooking sensor function is
activated, the cooking time will begin to count down
immediately, instead of once the selected temperature
setting has been reached.
Changing or deleting the time
Select the hotplate and then touch the
6
symbol.
Change the cooking time using the twist knob or set to
‹‹
to delete it.
When the time has elapsed
The hotplate switches off. A signal sounds,
‹
appears
in the hotplate display and
‹‹
flashes in the timer
display. Touch any symbol or press the twist knob; the
displays go out and the audible signal ceases.
Notes
– If a cooking time has been programmed for several
hotplates, the cooking time that ends first will
appear in the timer display. The
6
indicator for the
hotplate lights up orange.
– Select the relevant hotplate to call up the remaining
cooking time for a hotplate. The cooking time will
appear for 10
seconds.
The short-term timer
You can set a time from 1 to 99 minutes on the short-
term timer.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
How to activate the function
1 Touch the
Š
symbol;
‹‹
appears in the timer
display.
2 Select the required time using the twist knob.
3 Touch the
Š
symbol again to confirm the selected
time.
The cooking time begins to elapse.
Changing or deleting the time
Touch the
Š
symbol and use the twist knob to change
the time or set it to
‹‹
.
When the time has elapsed
A signal sounds for three minutes.
‹‹
flashes in the
timer display. Touch the
Š
symbol again: The displays
go out and the audible signal ceases.
X|
Ü
Â
Y|
X|
Ü
Â
Y|