Gaggenau CV 282, Instruction Manual

Page: 17 / 64

17
Operating the appliance
en
Switching off the hotplate
Select the hotplate and turn the twist knob until
‹
appears. The hotplate switches itself off and the
residual heat indicator lights up.
Notes
– If no pan has been placed on the hotplate, the
selected power level flashes. After a certain time
has elapsed, the hotplate switches off.
– If there is cookware on the hotplate before
switching the hob on, this is detected at most
20 seconds after touching the main switch and the
hotplate is selected automatically. Set the heat
setting within the next 10 seconds. Otherwise the
hotplate will switch itself off again after
20 seconds.
Even if there are several pots and pans on the hob
when it is switched on, only one item of cookware is
detected.
– The ventilation system must be switched off
separately.
~
"Switching off the ventilation
system" on page 17
Switching the ventilation system on
and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note: Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on the
cookware at an angle.
Note: Do not obstruct the ventilation openings. Do not
place any objects on the ventilation grille. Doing so
would reduce the performance of the ventilation system.
Switching on the ventilation system
1 Touch the
}
symbol.
The
}
symbol will be lit orange. The ventilation
system will start at fan setting
ƒ
. The fan setting
that is selected will be shown on the display panel.
Notes
–
Heat settings cannot be changed while the
ventilation system fan settings are being
configured.
–
During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
}
symbol will be lit white when the Twist knob
can be used to configure the heat settings again.
2 Use the twist knob to select the required setting.
The fan setting that is selected will be shown on the
display panel.
3 To set a different fan setting, touch the
}
symbol
and use the twist knob to select the required
setting.
The fan setting that is selected will be shown on the
display panel.
Switching off the ventilation system
If you want to switch off the appliance, touch the
#
symbol. If you only want to switch off the ventilation
system, proceed as follows:
1 Touch the
}
symbol.
2 Use the twist knob to select the fan setting
‹
.
3 Touch the
}
symbol to switch to the setting area
for the hob.
Intensive setting
Activate intensive mode if strong odours or large
amounts of steam are produced. In this mode, the
ventilation system briefly operates at maximum power. It
automatically switches back to a low setting after a
short time.
Switching on
1 Touch the
}
symbol.
2 Turn the rotary knob until
˜
appears.
Intensive mode is now activated.
Note: After 6 minutes, the appliance will automatically
switch back to fan setting
„
.