4. Operating System and Equipment
Alarm Message
Alarm messages are displayed in the form of
text or picture to indicate the current status of the
vehicle. The driver should always pay attention to
the presence of alarm messages.
–
When the ignition switch is at "ON" position, in
case of any abnormality of the vehicle, the
instrument cluster will display the alarm
message in priority, and return to the previous
interface when the alarm message is
confirmed with "OK" pressed. In the event of
no operation, the alarm message will appear
again 5s later.
–
In case of multiple alarm messages, press
◄/► to switch to the alarm message interface,
and ▲/▼ on the OK button to read the
previous/next alarm message.
–
If the vehicle is in good condition and there is
no alarm message, "No message" will be
displayed on the alarm message interface.
Call Information*
–
After the audio system is connected to the
mobile phone via Bluetooth and when there is
any call, it displays the call information,
including caller information, information during
call, calling information, information about end
of call, and information about missed call.
Hint
Operation of LCD instrument cluster is similar
to that of
7"
instrument cluster as described.
46
42
Summary of Contents for GS5
Page 6: ......
