5. Driving Directions
Caution
•
Always keep the radar sensor surface clean,
and do not cover the radar sensor.
•
Keep the radar sensor on the bumper clean
and avoid icing to ensure its function.
•
Clean the radar sensor surface with soft wet
cloth to avoid surface scratching.
Warning
•
The reversing radar system does not take the
place of the driver’s observation to the
surrounding environment, so the driver shall
focus attention on reversing safely and
adjusting parking position according to actual
conditions.
•
There may be blind spot when the radar
sensor is detecting obstacles, so the driver
must observe carefully during reversing, to
avoid scraping or collision.
•
During reversing in a narrow space or on
uphill, the radar sensor may detect railings,
trees or slope, which is considered normal.
•
At fast reversing speed, the detection
accuracy of the radar sensor may decrease
somewhat. It is suggested that the reversing
speed should not exceed 10km/h. The
continuous alarm sound from the revising
radar system indicates that the vehicle is very
close to the obstacles. The driver shall stop
revising immediately to avoid accident.
Warning
•
Clean the radar sensor with high pressure
cleaning device in a short time and in gentle
manner; keep at least 10 cm between the
nozzle and the sensor.
•
Water drops on the radar sensor of the rear
bumper can influence sensitivity of the sensor.
To restore sensitivity, wipe off the water
drops.
•
Surfaces of certain materials cannot reflect
the signals from the radar sensor, so that the
sensor cannot detect such objects or persons
in clothes made of such materials.
•
The radar sensor may not detect the objects if
interfered by outside noise.
•
The radar sensor is a precision part. Do not
dismantle or repair it by yourself. Damage
caused by such dismantling or repairing is not
covered in the warranty of GAC MOTOR.
231
189
Summary of Contents for GS5
Page 6: ......
