4. Operating System and Equipment
Hint
The A/C system can also be controlled by
switched the audio system display interface to the
A/C system control interface.
Temperature Setting
– Pull/push the
button to raise/lower the
temperature at a step of 0.5°C.
– The adjusted temperature value is shown on
the audio display. The temperature is
adjustable within 18.5
℃
~31.5
℃
. When the set
temperature is lower than 18.5°C, LO is
shown; and when the set temperature is
higher than 31.5°C, HI is shown.
In AUTO mode, LO/HI is reached, the system
will keep operating in a large air supply state.
In AUTO mode, in order to obtain the most
ideal interior temperature, we recommend that the
set temperature is 25.0°C. If necessary, you can
adjust the temperature by yourself.
Hint
The temperature value on the display is the
target value of the set temperature, instead of the
measured value of the interior temperature.
A/C Button
When pulling/pushing A/C button is pressed,
the button light will be on and the refrigeration
function of the A/C system will be enabled. When
the refrigeration function is enabled:
– This mean refrigeration / dehumidification is
needed, but the compressor is not necessary
to run.
– If the outside temperature is below 0°C, the
button light will be on, but the compressor
may not work.
When pulling/pushing A/C button is pressed
again, the button light will be off and the
refrigeration function will be disabled.
129
123
Summary of Contents for GS5
Page 6: ......
