50
If the
group address
(REG01) is designated while RS485 multi-drop connection is
being made in the
RS485 mode
, the
local station address
of all modems will be
initialized to 000. Exercise care when issuing this command.
For a list of the
factory default values
, see the section titled p.27
M
EMORY
R
EGISTER
D
ESCRIPTION
.
ODA
Disable Received Data Output
Syntax
ODA{Local Station Address}
Local Station Address
: local station address
for
485 mode
(000 to A22).
Response
P0
: command accepted
N0
:
command error
(Except
485 mode
)
Function
Disables output
of any data received via the wireless link to the terminal
equipment.
Data received, while output is disabled, is stored in the receive buffer.
When the modem’s power is turned on (or a reset), the modem is in the state to
enable
the
received data output
.
Example
>
@
ODA
CR/LF
:
disable
the output of received wireless data
<P0
CR/LF
: command accepted
(Data is not output during this period even if received.)
>
@
OEN
CR/LF
:
enable
the output of received wireless data.
<P0
CR/LF
: command accepted
<RXT002HELLO
CR/LF
: outputs data stored in the receive buffer
<RXT003MAIL
CR/LF
:
OEN
Enable Received Data Output
Syntax
OEN{Local Station Address}
Local Station Address :
local station address
for
485 mode
(000 to A22).
Response
P0
: command accepted
N0
:
command error
(Except
485 mode
)
Function
Enables output
of any data received via the wireless link to the terminal equipment.
Summary of Contents for FDL01TU
