FUTABA FDL01TU, Instruction Manual

Page: 44 / 83

30
REG06: Frequency Group [default value:C00]
•
Refer to p.18
F
REQUENCY
G
ROUPING
in Section 3, for a detailed description of the
frequency operation modes.
Method Group Numbers
Frequencies
per Group
A 0 to 75 1
B 0 to 37 2
C 0 to 24 3
D 0 to 18 4
E 0 to 11 6
F 0 to 8 8
G 0 to 5 12
Table 5–2: Grouping of Frequency
REG07: RS485 Packet Interval [default value: 05H]
•
In the packet transmission mode with the RS485 mode is used, sets the interval
between response and/or received data which output from the modem to RS485 line.
•
Be able to set 0 to 254 ms at increment of 1 ms. 255ms is not allowed. The default
value is 5 ms.
•
Set this
interval
to a larger value than the
receiving interval
set by
REG14
.
•
Suitable setting of this
interval
avoids the data collision possibility of RS485 line.
REG08: Repeater 1 Address [default value: A00]
•
When a repeater is used, set the repeater1 address to pass through.
REG09: Repeater 2 Address [default value: A00]
•
When second
repeater
is used, set the
repeater2 address
to pass through.
REG10: Command Header [default value: 40H]
•
Sets the character that identifies the start of a command.
•
The default is character “@” (40H).
•
When this character is input from the terminal equipment after no character is
received for the
command recognition interval
(
REG15
) or longer, subsequent
input character is recognized as a command for the modem.