4-1
4.
AIS OPERATION
Connected to an AIS Transponder via an AIS Interface, the FR-8xx2 series can show the name,
position and other nav data of the nearest 100 AIS transponder-equipped ships.
This radar accepts position data fixed by WGS-84 geodetic datum. Set the datum to WGS-84 on
the GPS navigator connected to this radar. If other type of datum is input, the error message
"DATUM" appears and the AIS feature is inoperative.
4.1
Controls for Use with AIS
ENTER:
Displays data for cursor-selected active AIS target (in the data box at the bottom of the
screen).
CANCEL/HL OFF:
Removes data of cursor-selected AIS target from the data box.
MENU:
Accesses the Target and AIS menus for AIS operations.
Trackball:
Chooses active target to display its data.
4.2
Turning the AIS Display On or Off
You may turn the AIS display on or off. The system continues processing of AIS targets regardless
of whether the AIS display is on or off, provided it has been activated.
1. Press the
MENU
key to display the main menu.
2. Choose AIS and then press the
ENTER
key.
AIS menu
3. Choose DIsplay and then press the
ENTER
key.
4. Choose Off or On as appropriate and then press the
ENTER
key.
5. Press the
MENU
key to close the menu.
GPS
Brill/Color
Echo
Mark
Target Trails
Custom 1
Display
Custom 2
Custom 3
Target
ARP
AIS
Manual Tune
Menu
Menu
AIS
AIS
System
Display
: Off
Symbol Color
: Green
Range
: 3.0nm
Sector Start
: 340
Sector End
: 20
Sort By
: Range
Number of Target
: 100
S
/
T
/
W
/
X
: Select
[ENTER]: Enter [CANCEL/HL OFF]: Back
[MENU]: Exit
