1. OPERATIONAL OVERVIEW
1-28
1.24.6
Trail copy
Trails are canceled and restarted whenever the range is changed. However, you may continue
trails on the same range, without restarting them, when the range is changed to a next larger or
smaller range scale. Note however that when the range is changed, only those trails within the
previous range are continued; no trails are generated for targets outside the previous range.
How trail copy works
1. Press the
MENU
key to open the menu.
2. Choose the Target Trails menu and press the
ENTER
key.
3. Choose Trail Copy and then press the
ENTER
key.
4. Choose Off or On as appropriate and then press the
ENTER
key.
5. Press the
MENU
key to close the menu.
1.24.7
Thin trails
Target trails may be painted with thinner lines if desired. This can be useful when there are a lot
of targets on the screen.
1. Press the
MENU
key to open the menu.
2. Choose the Target Trails menu and press the
ENTER
key.
3. Choose Thin and then press the
ENTER
key.
4. Choose Off or On as appropriate and then press the
ENTER
key.
5. Press the
MENU
key to close the menu.
1.24.8
Own ship trail
You may show own ship’s trail as follows:
1. Press the
MENU
key to open the menu.
2. Choose Own Ship and then press the
ENTER
key.
3. Choose Off or On as appropriate and then press the
ENTER
key.
4. Press the
MENU
key to close the menu.
(a) Previous range
(b) New range
No trail generated
for target not within
previous range
Off
On
