3. ARP OPERATION
3-4
3. Choose Auto Acquire and then press the
ENTER
key.
4. Choose On to enable automatic acquisition.
5. Press the
ENTER
key.
6. Press the
MENU
key to close the menu.
3.5
Terminating Tracking of ARP Targets
When ten targets have been acquired, no more acquisition occurs unless targets are cancelled. If
you need to acquire additional targets, you must first cancel one or more individual targets, or all
targets, using one of the procedures below.
3.5.1
Terminating tracking of selected targets
1. Place the cursor on the target to terminate tracking.
2. Press the
CANCEL/HL OFF
key to terminate tracking and erase the target.
3.5.2
Terminating tracking of all targets
1. Press the
MENU
key to open the menu.
2. Choose ARP and then press the
ENTER
key.
3. Choose All Cancel and then press the
ENTER
key.
4. Choose Yes.
5. Press the
ENTER
key.
6. Press the
MENU
key to close the menu.
Off
On
No
Yes
