1. OPERATIONAL OVERVIEW
1-31
1.26.2
Origin mark mode
You may choose origin mark movement from either True or Relative as follows:
1. Press the
MENU
key to open the menu.
2. Choose Mark and press the
ENTER
key.
3. Choose Origin Mark Mode and then press the
ENTER
key.
4. Choose Relative or True as appropriate and then press the
ENTER
key.
5. Press the
MENU
key to close the menu.
1.27
Temporarily Hiding the Heading Line, Heading
Marker
The heading line indicate the ship's heading in all presentation modes. The heading line is a line
from the own ship position to the outer edge of the radar display area and appears at zero degrees
on the bearing scale in head-up mode; it changes the orientation depending on the ship orientation
in north-up and true motion modes. The heading marker is a small circle on the bearing scale to
indicate the heading when the display is off-centered or is in north-up or TM mode.
To temporarily hide the heading line and heading marker to look at targets existing dead ahead of
own ship, press and hold down the
CANCEL/HL OFF
key. To re-display the heading line release
the key.
Relative
True
