2. SYSTEM MENU
28
[
Zero Line Area
]: This fea-
ture adjusts the transmission
line so that the transmission
line disappears when the
menu item [Zero Line Rejector] is turned on.
For a long tail, increase the value. If the trans-
mission line does not disappear, lower the TX
power.
[
Bottom Detect
]: In some in-
stallations the tail of the TX
line or the echo afterglow can
be mistaken for the bottom
echo. If this occurs, raise this setting to solve
the problem. Too low a setting may prevent
display of the bottom echo.
2.7
Transducer Menu
[
Type
]: Select the transducer. See section
4.11.
2.8
Demo Menu
[
Demonstrate
]: The demonstration mode
provides, without connection of the transduc-
er, simulated operation of the equipment, us-
ing internally generated echoes. All controls
are operative. The message [DEMO] appears
at the bottom right corner on the screen when
the demonstration mode is active.
• [Off]: Deactivate the demonstration mode.
• [Demo1], [Demo3]: Shallow depth demon-
stration.
• [Demo2], [Demo4]: Deep depth demonstra-
tion.
2.9
Tankenmaru Menu
The Tankenmaru system outputs the video
signal from your display unit to the display unit
of a Tankenmaru-equipped partner ship, etc.,
via a radio transmitter.
[
Output
]: Select On to output this unit’s video
signal to the display unit of a partner ship in
the Tankenmaru system, via a radio transmit-
ter.
[
Pic. Sync
]: Display or don’t display the same
video signal on your display unit and a part-
ner’s display unit.
• [Yes]: Display the same video signal on
both your display unit and a partner’s dis-
play unit. Note that the TX interval is longer
when compared to the [No] setting.
• [No]: The display units are independent of
one another.
[
Sub Clutter
]: Reduce clutter at a partner’s
display unit. The higher the setting the greater
the degree of clutter reduction.
Summary of Contents for FCV-627
Page 1: ...FISH FINDER FCV 627 OPERATOR S MANUAL www furuno com B R I L L GAIN ...
Page 62: ...D 1 ...
Page 63: ...D 2 ...
