Furuno FCV-627, Operator'S Manual

Page: 20 / 65

1. OPERATION
12
1.15.1 How to activate
ACCU-FISH
ACCU-FISH is inoperative when the trans-
ducer type is selected to 600W (on the [Trans-
ducer] menu).
1. Open the menu, select [Display] and
press the ENTER key.
2. Select [ACCU-FISH] and press the EN-
TER key to show the [ACCU-FISH] menu.
3. Select [ACCU-FISH] and press the EN-
TER key.
4. Select [On] to enable ACCU-FISH.
1.15.2 Fish symbols
1. Open the menu, select [Display] and
press the ENTER key.
2. Select [ACCU-FISH] and press the EN-
TER key to show the [ACCU-FISH] menu.
3. Select [Fish Symbols] and press the EN-
TER key.
[Fish Symbols] setting box
4. Select desired symbol and press the EN-
TER key. The size of the symbol is scaled
according to the estimated length of the
fish.
Note: To hide the fish symbol, select [Off]
at step 4 and press the ENTER key.
Note: You can select which frequency display
to show the fish symbols and fish information,
with [Symbols Area] on the [ACCU-FISH]
menu.
• [Dual]: Symbols and info shown on both HF
and LF displays.
• [HF]: Symbols and info shown on HF dis-
play.
• [LF]: Symbols and info shown on LF dis-
play.
1.15.3 Fish info
1. Open the menu, select [Display] and
press the ENTER key.
2. Select [ACCU-FISH] and press the EN-
TER key to show the [ACCU-FISH] menu.
3. Select [Fish Info] and press the ENTER
key.
[Fish Info] setting box
4. Use
S
or
T
to select [Off], [Fish Size] or
[Depth] as appropriate and press the EN-
TER key.
Fish symbols with fish info figure
Striped Solid Circle Square
Large fish symbol
(more than 50 cm, or
more than 20 inches)
Small fish symbol
(10 to 49 cm, or 4 to
19 inches)
Fish length or depth
is shown in red.