Furuno FCV-627, Operator'S Manual

Page: 13 / 65

1. OPERATION
5
1.5 How to Select a
Range
The basic range may be selected in the [Auto]
or [Manual] mode.
Note: The RANGE key is inoperative when
the bottom discrimination feature is active.
1. Press the RANGE key to open the
[Range] setting window.
2. Use W or X to select [Auto] or [Manual].
[Auto]: The range changes automatically
to display the bottom echo on the screen
always. (The shift function is inoperative
in the auto mode.) [AUTO_R] is shown at
the top left corner on the screen.
[Manual]: The range may be selected
from the eight ranges listed below.
[MAN_R] is shown at the top left corner
on the screen.
If you selected [Auto], go to step 4. For
[Manual], go to the next step.
3. For [Manual], use the RANGE key (or
S
or
T
) to select the range.
*: Japanese unit of depth measurement
Note: Basic ranges may be preset as de-
sired. For further details, see section 2.2.
4. Press the ENTER key.
Note: The range mode indication, which ap-
pears at the top-left corner, may be turned on
or off with [Header Info] on the [Display]
menu. For details, see [Header Info] on page
23.
1.6 How to Adjust the
Gain
How to select the gain adjustment mode
The gain may be adjusted automatically
([Fishing] or [Cruising]) or manually. In auto-
matic adjustment, the range is automatically
selected to display the bottom echo in reddish
brown. The automatic gain setting can be fine
tuned with the offset gain feature. Clutter and
TVG are also adjusted automatically when
automatic gain is active.
For manual gain adjustment, adjust the gain
according to signal strength.
These are
available with
Manual mode.
Unit
Basic Range
1 2 3 4 5 6 7 8
1000 600 400
200 120 60 30 15
300 200 150 80 40
20 10
5
m
ft
fm
150
100 80
40
20 10 5 3
pb 200 150
100
20
50 10 5 3
HR* 200 150 100 50 30 15 8 4
CAUTION
Adjust the gain correctly.
Incorrect adjustment can lead to a dangerous
situation if the boat is steering according to the
depth indication.
Too high Correct Too low