Furuno FCV-627, Operator'S Manual

Page: 23 / 65

1. OPERATION
15
1. Open the menu, select [Alarm] and press
the ENTER key.
2. Select an alarm among [ALARM1] -
[ALARM5] (default alarm names) and
press the
ENTER key.
3. Select [Setting] and press the ENTER
key. If you want to change the name of an
alarm, go to step 4. Otherwise go to step
6.
[Setting] window
4. To change the name of the
alarm, select [Name] and
press the
ENTER key.
5. Enter the name of the
alarm. (Max. of eight characters)
1) Use
S or T to select a character. Use
S to select a character in numerical
order followed by alphabet order. Use
T
to select a character in reverse or-
der of that with S .
2) Press
X
to move the cursor to the
next place.
3) Repeat steps 1) and 2) to complete
the name.
4) Press the ENTER key to finish.
6. Select [Sound] and press the ENTER
key.
7. Select desired alarm sound and press the
ENTER key.
8. Select [Fish Type], [Temperature], [Bot-
tom Type] or [Bottom] as applicable and
press the
ENTER key.
9. Do one of the following according to the
item selected at step 8.
Fish Type
1) Select [ACCU-FISH], [Fish School],
[Bottom Fish(Only BL)] or [Bottom]
and press the
ENTER key.
For [ACCU-FISH] go to step 2). For
other choices go to step 6).
2) Select [From] (under
[Fish Type]) and press
the
ENTER key.
3) Set the minimum fish
length and press the
ENTER key.
4) Select [Span] (below
[Fish Type]) and
press the
ENTER
key.
5) Set the width of the alarm and press
the ENTER key.
6) Select [Fish Level] and press the EN-
TER key.
7) Select the echo strength that triggers
the alarm, referring to the information
below.
[Weak]: Echoes stronger than light-
blue trigger the alarm.
[Medium]: Echoes stronger than yel-
low trigger the alarm.
[Strong]: Echoes stronger than red
trigger the alarm.
*
*
*
* Operable when corresponding
alarm is activated.