Furuno FAR-3230SW-BB, Installation Manual

Page: 115 / 169

AP-1
APPENDIX 1 JIS CABLE GUIDE
Core
Type Area Diameter
The following reference table lists gives the measurements of JIS cables commonly used with Furuno products:
TTYCSLA-4
MPYC-4
TPYCY
DPYCY
Cable
Diameter
DPYC-1.5 1.5mm 2 1.56mm 11.7mm
DPYC-2.5 2.5mm 2 2.01mm 12.8mm
DPYC-4 4.0mm 2 2.55mm 13.9mm
DPYC-6 6.0mm 2 3.12mm 15.2mm
DPYC-10 10.0mm 2 4.05mm 17.1mm
DPYCY-1.5 1.5mm 2 1.56mm 13.7mm
DPYCY-2.5 2.5mm 2 2.01mm 14.8mm
DPYCY-4 4.0mm 2 2.55mm 15.9mm
MPYC-2 1.0mm 2 1.29mm 10.0mm
MPYC-4 1.0mm 2 1.29mm 11.2mm
MPYC-7 1.0mm 2 1.29mm 13.2mm
MPYC-12 1.0mm 2 1.29mm 16.8mm
TPYC-1.5 1.5mm 2 1.56mm 12.5mm
TPYC-2.5 2.5mm 2 2.01mm 13.5mm
TPYC-4 4.0mm 2 2.55mm 14.7mm
TPYCY-1.5 1.5mm 2 1.56mm 14.5mm
TPYCY-2.5 2.5mm 2 2.01mm 15.5mm
TPYCY-4 4.0mm 2 2.55mm 16.9mm
TTYCS-1 0.75mm 2 1.11mm 10.1mm
TTYCS-1T 0.75mm 2 1.11mm 10.6mm
TTYCS-1Q 0.75mm 2 1.11mm 11.3mm
TTYCS-4 0.75mm 2 1.11mm 16.3mm
TTYCSLA-1 0.75mm 2 1.11mm 9.4mm
TTYCSLA-1T 0.75mm 2 1.11mm 10.1mm
TTYCSLA-1Q 0.75mm 2 1.11mm 10.8mm
TTYCSLA-4 0.75mm 2 1.11mm 15.7mm
TTYCY-1 0.75mm 2 1.11mm 11.0mm
TTYCY-1T 0.75mm 2 1.11mm 11.7mm
TTYCY-1Q 0.75mm 2 1.11mm 12.6mm
TTYCY-4 0.75mm 2 1.11mm 17.7mm
TTYCY-4S 0.75mm 2 1.11mm 21.1mm
TTYCY-4SLA 0.75mm 2 1.11mm 19.5mm
TTYCYS-1 0.75mm 2 1.11mm 12.1mm
TTYCYS-4 0.75mm 2 1.11mm 18.5mm
TTYCYSLA-1 0.75mm 2 1.11mm 11.2mm
TTYCYSLA-4 0.75mm 2 1.11mm 17.9mm
EX: TTYCYSLA - 4 MPYC - 4
Designation type # of twisted pairs Designation type # of cores
1 2 3 4 5 6 1 2 3 4
Cables listed in the manual are usually shown as Japanese Industrial Standard (JIS). Use the following guide to locate
an equivalent cable locally.
JIS cable names may have up to 6 alphabetical characters, followed by a dash and a numerical value (example:
DPYC-2.5).
For core types D and T, the numerical designation indicates the
cross-sectional Area (mm
2
) of the core wire(s) in the
cable.
For core types M and TT, the numerical designation indicates the
number of core wires in the cable.
1. Core Type
D:
Double core power line
T:
Triple core power line
M:
Multi core
TT:
Twisted pair communications
(1Q=quad cable)
2. Insulation Type
P:
Ethylene Propylene
Rubber
3. Sheath Type
Y:
PVC (Vinyl)
4. Armor Type
C:
Steel
5. Sheath Type
Y:
Anticorrosive vinyl
sheath
6. Shielding Type
S:
All cores in one sheath
-S:
Indivisually sheathed cores
SLA:
All cores in one shield, plastic
tape w/aluminum tape
-SLA:
I ndividually shielded cores,
plastic tape w/aluminum tape
Core
Type Area Diameter
Cable
Diameter