Furuno FAR-3230SW-BB, Installation Manual

Page: 107 / 169

3. SETTINGS AND ADJUSTMENTS
3-7
INSTALLATION menu
[RANGE UNIT] : For the B-type radar , select the range unit, NM, SM, KM or kyd then
push the left button.
[MODEL] : Confirm the model of your radar. If this setting is different from your model,
the radar will not function properly. The number before a diagonal (12, 25, 30) is the
output power (in kW). [UP], [DOWN] indicates the location of the transceiver unit. [UP]
is in the antenna unit, and [DOWN] means separate transceiver unit.
[S-SSD] means S-band solid state device.
[TYPE] : Select the type of radar: [IMO], [A] or [B].
[IMO]: IMO specifications
[A]: Near-IMO specifications
[B]: Non-Japanese fishing vessel specifications
[ON TIME] , [TX TIME] : These items show the number of hours the radar has been
turned on and transmitted, respectively. Value can be changed; for example, after re-
placing the magnetron. [TX TIME] can be reset to 0.
[PM GAIN ADJ] : Adjust the performance monitor, automatically or manually, whenev-
er the magnetron is replaced.
Note: Turn off a stern blind sector before adjusting the PM gain, to display the echo
from the performance monitor properly.
IMO- and A-type radars
B-type radar
AUTO/MANUAL 0
AUTO/MANUAL 0