Furukawa electric S153 Ver.2, User Manual

Page: 93 / 164

Programming Guide
8-15
Parameter name Min Max Description
Z Push Type 0 2
Selecting the direction of splicing pushing.(0:left side
fiber, 1:right side fiber, 2:both side fiber)
Start Time [ms] 0 32767
Starting time for pulse arc discharge in Main arc. (It
could start from 1
st
arc discharge or skip it and begin
from 2
nd
arc discharge, depending on first arc duration
setting)
1st Arc On Time [ms] *1 0 32767 On time of pulse in 1
st
arc discharge.
1st Arc Off Time [ms] *1 0 32767 Off time of pulse in 1
st
arc discharge.
2nd Arc On Time [ms] *2 0 32767 On time of pulse in 2
nd
arc discharge.
2nd Arc Off Time [ms] *2 0 32767 Off time of pulse in 2
nd
arc discharge.
Re Arc Times [times] 0 255
Allowable numbers for the repeat arc in programmed
additional arc mode.
For example, “0” means no repeat arc is allowed.
Re Arc Duration [ms] 0 32767 Duration of additional arc [msec]
Re Arc Interval [ms] 0 32767 Interval between additional arcs and [msec]
Repeat Arc Power Offset -127 128
Power of additional arc is Arc Power added by Repeat
Arc Power Offset
Re Arc Power 0 255 Power of additional arc
Arc Mid Offset [µm] -100 100
Spliced point offset from the arc center [µm]. See
“explanation for arc mid offset”.
Gap Offset [um] 0 100 Offset value for pre-splice fiber position (um)