Furukawa electric S153 Ver.2 User Manual Download Page 17

Page: 17 / 164

Safety Information and Instructions

1-9

CAUTION

Do not place the fusion splicer on an unstable or inclined surface. There is a

possibility that the fusion splicer will fall and cause injury.

Disconnect all cords when moving the fusion splicer. Failure to do so may damage

the cords which may cause fire or electrical shock.

Do not place the cords around any heating instrument. Doing so may damage the

cords which cause fire or electrical shock.

Do not connect or disconnect cords with wet hands. Doing so may cause fire or

electrical shock.

Do not pull the cord to disconnect. Doing so may damage the cords which may

cause fire or electrical shock. Hold the plug portion and disconnect the cord.

Do not put heavy items on the cords. Doing so may damage the cords which may

cause fire or electrical shock.

Do not modify the cords and do not over-bend, over-twist, or over-stretch the cords.

Summary of Contents for S153 Ver.2





































































































































































Search results

Summary of Contents for S153 Ver.2

Reviews:

Related manuals for S153 Ver.2

Brands by name

Popular brands

Furukawa electric S153 Ver.2, User Manual

Search results

Summary of Contents for S153 Ver.2

Reviews:

Related manuals for S153 Ver.2

Brands by name

Popular brands