Furukawa electric S153 Ver.2, User Manual, Page: 58 / 164

Basic Operation
6-8
6.2. Installing programs
Load appropriate programs before operation. The S153 Ver.2 fusion splicer already has
pre-defined programs installed for most commonly used fiber types and protection sleeves as
default programs. User can select the program for fusion and heat, or edit and store it to a new
program slot.
6.2.1. Fusion Program
Load the appropriate fusion program for the specific fibers to be
spliced.
1. Select “Fusion PRGM” and press Enter Key to display the Fusion
PRGM screen.
2. Select “Recent Programs” to select from the programs recently
used, or “All Programs” to select from all the programs installed.
3. Select the proper program by pressing
▲ ▼
keys and press the
Select key.
A comment for the selected program is displayed by pressing
► key, and will disappear by pressing ◄ key.